SanDisk CompactFlash 5000 Manual Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 97
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
SanDisk Industrial Grade CompactFlash 5000 Product Manual
© 2007 SanDisk® Corporation 23 July 2007
Figure 6: Common and Attribute Memory Write Timing Diagram
Notes: 1) Shaded areas may be high or low.
2) When the data I/O pins are in the output state, no signals shall be
applied to the data pins (D[15::0]) by the host system
3) May be high or low for write timing, but restrictions on -OE from
previous figures apply.
4) SanDisk CompactFlash Memory Cards do not assert the -WAIT
signal.
3.3.8
I/O Read (Input) Timing Specification
Figure 7:
I/O Read Timing Diagram
Notes: 1) All timings are measured at the CompactFlash Memory Card.
2) Skews and delays from the host system driver/receiver to the card
must be accounted for by the system design.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 96 97

Comentarios a estos manuales

Sin comentarios