SanDisk CompactFlash 5000 Manual de instrucciones descargar pdf (Pagina 23)

Publication LOGIX-AP007B-EN-P - January 2007

Example Application 23

7. Enter the slot number where the controller will be located in the value

column.

When the application enters Run mode, the D_CF_Intialization routine

executes. The paths for all the message instructions will be modified to

contain the slot number you just entered. You can add a new rung zero

to the D_CF_Intialization routine to move the slot number into the tag

Controller_Slot_Number.

8. Download the project to the controller and go online.

9. Put the controller into Run mode.

Create a File on the

CompactFlash Card

Before you can perform any read or write commands to a file, you must create

the file on the CompactFlash card first.

1. Open the MainPrograms tags.

Make sure the Monitor Tags tab is selected in the tag editor.

2. Sort the tags by Name.

3. Find the tag CF_Data_Working.

This is a user-defined data type (UDT).

4. Click the + next to the tag to expand the CF_Data_Working tag.

The FileName element of the UDT CF_Data_Working needs to be

modified.

FileName, as it implies, is the name of the file you want to perform an

operation on, in this case create. The file name can be up to 140

characters in length. You must include a file extension.

5. Click in the value field.

The Browse button appears.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Sin comentarios

SanDisk CompactFlash 5000 Manual de instrucciones Pagina 23